io Lighting’s line series .75 is approximately .75" x .75" in cross section. UL Listed for damp locations, its low profile housing enables functional luminous intensities from “tight” architectural details such as niches, coves & casework. Similar to halogen light sources, LEDs are point sources that offer superior definition to three dimensional objects and sparkle to reflective surfaces.
series .75 is a low voltage linear accent luminaire that may be ordered in incremental nominal lengths that range from 6" to 96". Optional beam spreads along the perpendicular axis of the fixture include 10°, 45°, and 65°. For details on the asymmetric beam spread, see dedicated specification sheet. io ensures that each LED is driven with the proper current and voltage which enables the average rated life to be 50,000 hours at 70% of the lamp lumen output. To ensure proper performance, architectural details should allow for ventilation and air flow around the fixture. Ambient temperature surrounding the fixture shall not exceed 120˚F.
line series .75 is available with two lumen outputs for white light only. Red, green and blue are available in high output only. IES format files may be downloaded for lighting calculations.
The light weight, yet durable, extruded aluminum housing provides recommended heat sink requirements for LEDs. Patented optical assembly is composed of a customized acrylic material that offers very high transmisivity, UV stability, and excellent longevity. series .75 is UL Listed for damp locations only.
4'-0" 22 AWG, 600 volt TFFN rated power cords are supplied with strain reliefs. 24 volt 100 watt power supply will be provided as a standard. See daisy chain and remote distance requirements in chart on the lower left hand corner of this specification sheet. Alternate power supply options are available. Consult io website or io representative for io driver specification sheets.
Power supply and dimming module must be specified separately. For detailed information, see the LED Linear brochure or the Power Supply specification sheet.
Anodized aluminum finish is standard. Custom finishes
available upon request.
|
