LEDge is a member of io’s lineTM family of linear LED based products. LEDge is a low voltage linear shelf light which offers exceptional warm and cool white light for a variety of different shelf and casework conditions. LEDge offers illumination levels equivalent to halogen and fl uorescent based alternates with signifi cant benefi ts. LEDge delivers exquisite white light without the damaging ultra-violet (UV), and infrared (IR) wavelengths or radiant heat that conventional light sources produce. LEDge also offers superior defi nition to three-dimensional objects and sparkle to refl ective surfaces. io ensures that each LED is driven with the proper current and voltage which enables the average rated life to be 50,000 hours at 70% of the lamp lumen output. To ensure proper performance, architectural details should allow for ventilation and air fl ow around the fi xture. Ambient temperature surrounding the fi xture shall not exceed 120°F.
LEDge’s beam spread and luminous intensities are perfect for shelf lighting applications. Two luminous intensities are available:
IES format files may be downloaded for lighting calculations.
Available in two profiles, LEDge can either be mounted directly to 3/8" glass or surface mounted to the underside of any shelving unit. The LEDge housing is made of extruded aluminum, providing the recommended heat sink requirements for io’s proprietary printed circuit boards (PCB’s). Both LEDge profi les are provided with neoprene gaskets which isolate the majority of the heat from the surface it is mounted. LEDge is UL listed for dry locations.
LEDge is supplied with a 4'-0' 20AWG, 600 volt TFFN rated power cord. A 24 volt 100 watt power supply will be provided as a standard. See daisy chain and remote distance requirements in chart on the lower left hand corner of this specifi cation sheet.
Power supply and dimming module must be specified separately. For detailed information, see the LED Linear brochure or the Power Supply specification sheet.
Power consumption does not include power supply losses. Consult io driver specifi cation sheets for losses associated with each driver option.
Anodized aluminum finish is standard. Custom finishes
may be available upon request.
|
